Skip to content
Rivora

Air-driven pumps for difficult liquids

Rivora makes AOD pumps, basket strainers and priming chambers. Our air-operated double-diaphragm pumps prime themselves, run dry without damage and move acids, slurry, paint and solvent on nothing but compressed air.

Liquid outLiquid inAir in12345
  1. 1Air valve
  2. 2Diaphragm
  3. 3Ball check
  4. 4Discharge manifold
  5. 5Suction manifold
Strokes 0

More air, more flow. That's the whole control system.

How an AOD pump works

Two diaphragms, one shaft and a valve that moves air between them. Scroll to run the stroke.

Liquid outLiquid inAir in

Step 1 of 4Air pushes one diaphragm

  1. Step 1

    Air pushes one diaphragm

    Compressed air fills the chamber behind the left diaphragm and pushes it outward. The liquid in front of it has one way out: up, past the top ball check.

  2. Step 2

    The shaft pulls the other

    Both diaphragms share one shaft, so as the left one pushes, the right one is pulled in. Its chamber opens up and draws liquid in through the bottom ball check.

  3. Step 3

    The air valve shifts

    At the end of the stroke the valve switches the air to the other side and lets the spent air out through the muffler. The balls drop back onto their seats.

  4. Step 4

    And back the other way

    Now the right side pushes and the left side fills. Stroke after stroke, the liquid keeps coming. More air pressure, faster strokes, more flow.

Why AOD pumps end up on the hardest jobs

See the AOD pump range
  • Primes itself

    Draws liquid up a dry suction line on its own. No foot valve, no filling the casing first.

  • Runs dry without damage

    Nothing rubs or overheats when the liquid runs out, so an empty tank isn't an emergency.

  • No shaft seals

    The liquid never touches a rotating seal. There's no seal to leak, flush or replace.

  • Flow set by air

    Open the air regulator for more flow, close it for less. No variable-speed drive needed.

  • Stalls under pressure

    Close the outlet and it simply stops, then restarts when the valve opens. No relief valve needed.

  • No electrics at the pump

    Compressed air does the work, so there's no motor or spark source next to the liquid.

What are you pumping?

Pick the liquid closest to yours. We'll suggest the materials an AOD pump for it usually starts from.

The liquid
How thick it is

Suggested starting build

Acids and alkalis

Pump body
Polypropylene or pvdf
Diaphragms and balls
PTFE

Plastic bodies don't corrode, and PTFE won't react with almost anything.

Size the pump for the flow you need.

Send this to Rivora

A starting point, not a guarantee. We confirm every build against your exact liquid.

Strainers and priming chambers for the rest of the line

An AOD pump primes itself. The centrifugal pumps elsewhere in your plant need help, and every pump runs longer when nothing solid gets to it.

InOutMesh basket
Basket strainers, in sectionSheet 2

Basket strainers

A housing in the line with a removable mesh basket inside. Liquid passes through the basket and solids stay in it, before they can jam a valve, score a pump or block a nozzle.

  • Catches solids early

    Rags, scale, weld spatter and debris stop in the basket instead of in your equipment.

  • Basket lifts out

    Open the cover, lift the basket, empty it and refit it. No tools inside the line.

  • Large straining area

    A deep basket holds plenty of debris before the pressure drop climbs.

  • Mesh to suit the liquid

    Perforation and mesh size are chosen for what you need to stop.

SumpPriming chamberYour pump
Priming chambers, in sectionSheet 3

Priming chambers

A vessel on the suction side of a centrifugal pump that holds a reserve of liquid. When the pump starts it draws from the chamber first, pulls the line full behind it, and never starts dry.

  • Starts primed every time

    The chamber stays full between runs, so the pump always has liquid at its eye.

  • No foot valve trouble

    No more foot valves that stick, leak back or clog at the bottom of a sump.

  • Protects the seal

    A pump that never runs dry keeps its mechanical seal and impeller in good shape.

  • Works on suction lift

    For pumps that sit above the liquid they're drawing from.

Where AOD pumps earn their keep

Anywhere the liquid is corrosive, abrasive, thick, flammable or full of solids, and the pump has to keep going anyway.

  • Chemicals

    Acids, alkalis, solvents, intermediates

  • Dyes and pigments

    Dye liquors, pigment pastes, filter press feed

  • Paints and coatings

    Emulsions, enamels, resins, thinners

  • Pharmaceuticals

    Solvents, slurries, process liquids

  • Ceramics

    Slip, glaze, abrasive slurry

  • Textiles

    Dyes, sizing, chemical auxiliaries

  • Food and beverage

    Syrups, sauces, oils, wash water

  • Water and effluent

    Sludge, lime, polymer, dewatering

  • Oil and petrochemicals

    Diesel, lube oil, drain-off, tank bottoms

Tell us the liquid. We'll match the pump.

Send the liquid, the flow you need and how far it has to go. Our engineers come back with a build and a price.