Air-operated double-diaphragm pumps
Two diaphragms, one shaft and a valve that shifts the air between them. No motor, no seals to leak and almost nothing to go wrong, which is why AOD pumps end up on the hardest jobs in a plant.
What you get
Primes itself
Draws liquid up a dry suction line on its own. No foot valve, no filling the casing first.
Runs dry without damage
Nothing rubs or overheats when the liquid runs out, so an empty tank isn't an emergency.
No shaft seals
The liquid never touches a rotating seal. There's no seal to leak, flush or replace.
Flow set by air
Open the air regulator for more flow, close it for less. No variable-speed drive needed.
Stalls under pressure
Close the outlet and it simply stops, then restarts when the valve opens. No relief valve needed.
No electrics at the pump
Compressed air does the work, so there's no motor or spark source next to the liquid.
Built from what your liquid needs
The body, diaphragms and balls are chosen for the liquid, so the pump that moves acid isn't the one that moves diesel.
Pump body
- AluminiumLight, tough, and conductive so it can be grounded.
- Stainless steel 316Corrosion resistant and easy to clean.
- PolypropyleneShrugs off most acids and alkalis.
- PVDFFor strong acids, oxidisers and high purity.
- Cast ironHeavy duty, for abrasive sludge and slurry.
Diaphragms and balls
- PTFEChemically inert. The safe choice for aggressive liquids.
- SantopreneLong flex life and good abrasion resistance.
- Buna-N (nitrile)Made for oils, fuels and hydrocarbons.
- EPDMGood with water, mild chemicals and heat.
- Viton (FKM)For hot oils, solvents and aromatics.
Where it's used
- Tanker and drum unloading
- Filter press feed
- Transfer between process tanks
- Sump and pit dewatering
- Paint circulation
- Effluent and sludge handling
Tell us the liquid. We'll match the pump.
Send the liquid, the flow you need and how far it has to go. Our engineers come back with a build and a price.